top of page

Dex2 Ultra 400AC

​  Product Features

  • Superior welding programs in AC-Pulse MIG, AC short-circuit transition, quick pulse and others, to easily realize high-performance welding of carbon steel, stainless steel, aluminum alloy and other materials;

  • Wire feeding speed is faster and deposition rate is increased by more than 20%, under the same current;

  • Patented software algorithm enables high-frequency switching of polarity, low heat input, less spatter, and 0.5mm aluminum alloy welding;

  • By adjusting positive and negative polarity ratio of EN/EP, heat input is optimized, and optimal welding of large-gap bridge can be easily achieved;

  • Arc energy is controllable and effectively suppresses the generation of welding fumes. Glossiness of Al-Mg welding is as good as Al-Si welding with more beautiful weld shape;

  • Inverter frequency up to 110KHz enables higher control precision and more stable arc;

  • Comprehensive communication interfaces are able to communicate with different brands of robots and automation devices;

  • Touch sensing function with 80-400 voltage is easier to break down the rust on the surface of workpiece;

  • IOT interface is reserved to connect with Megmeet SMARC cloud system;

  • U-disk upgrade function ensures customers to easily obtain Megmeet's most cutting-edge welding technology;

  • Application industries: precision welding in automobiles and parts, two/tricycles, aerospace, military industry, rail vehicles, new energy, etc

AC Pulse

Accurate and fast switching of pulse polarity is achieved by Megmeet patented algorithm, which integrates high speed & high efficiency of MIG welding with high quality of TIG welding, greatly optimizes welding production efficiency and welding quality.

Welding Features:

  • High inverter frequency, more stable arc, higher precision;

  • With unique negative stability algorithm, AC MIG is as stable as 
    DC welding; 

  • Full-process heat input management, precise control of 
    penetration depth, to be easily competent in high-quality welding of 0.5mm ultra-thin plates;

  • By adjusting EN/EP ratio, wire melting speed can be dynamically regulated to realize higher deposition rate and higher welding efficiency; 

  • Gap tolerance is high and bridging ability is good, suitable for 
    welding of large-gap lap joints and uneven gaps; 

  • Welding fume is greatly reduced without black smoke deposition on welding seam, and welding surface is more beautiful.

AC Short Circuit Transition

High-frequency hardware system working with Megmeet patented algorithm could accurately pre-judge droplet necking. Droplet transition instant polarity is switched to negative arc, and droplet flows freely into fusion pool, which fundamentally eliminates the generation of large-particle spatter and smoke, and ensures high-speed and high-quality welding.

Welding Features:

  • High inverter frequency, more stable arc, higher precision;

  • With unique negative stability algorithm, AC MIG is as stable as 
    DC welding; 

  • Full-process heat input management, precise control of 
    penetration depth, to be easily competent in high-quality welding of 0.5mm ultra-thin plates;

  • By adjusting EN/EP ratio, wire melting speed can be dynamically regulated to realize higher deposition rate and higher welding efficiency; 

  • Gap tolerance is high and bridging ability is good, suitable for 
    welding of large-gap lap joints and uneven gaps; 

  • Welding fume is greatly reduced without black smoke deposition on welding seam, and welding surface is more beautiful.

Multiple Welding Programs

RSI Automation Sdn Bhd  Logo

RSI AUTOMATION (M) SDN BHD

Headquater

11, Jalan Kenari 12, Bandar Puchong Jaya, 47170 Puchong, Selangor.

Technical Center

No.8, Jalan Utama 2/32,

Taman Perindustrian Puchong Utama, Batu 14, 47100 Puchong, Selangor.

Service Office (Penang)

No.10 Hillir Sg Keluang 1

Taman Perindustrian Bayan Lepas Fasa 4, 11900 Bayan Lepas, Penang.

Mobile

+012 695 6726

+603 5888 8819

Email

Find Us On

Services

Engineering Support

Fabrication and Assembly

Design and Detailing

End-of-Arm Tooling (EOAT) Design

Authorized Lorch Service Partner

Process and Layout Simulation

Connect with our experts for all your welding solution needs.

Contact Us

© 2023 by RSI AUTOMATION (M) SDN BHD.  

bottom of page